Guangdong Huari Lighting Co., Ltd.
Main products:halogen lamp,ECO halogen lamp,metal halide lamp,LED lamp,energy saving lamp,HID auto lamp,HID lamps,Auto part,xenon lamp,Motorcycle Lighting,HID off-road Light,Halogen bulb,Halogen incandescent lamp,UV lamp,streetlight,ballast,explosion proof product,outd
Products
Contact Us
  • Contact Person : Ms. Li Sharon
  • Company Name : Guangdong Huari Lighting Co., Ltd.
  • Tel : 86-757-86697386
  • Fax : 86-757-86696811-386
  • Address : Guangdong,Foshan,Section A, Shishan Industry Park, Nanhai Dist.
  • Country/Region : China
  • Zip : 528225

HID series with good quality and competitive price

HID series with good quality and competitive price
Product Detailed
HID series with good quality and competitive price1)luminous flux up to 3300lm 2)Long Lifetime,3000hrs 3)safer. 4)12V 35W 5)

HID series with good quality and competitive price 

1.Super brightness; Its luminous flux(3000Lm) is 3 times as that of the halogen tungsten lamp(800Lm).So that it can emits more light

2.Extremely long life;The halogen lamp can only last 400 hours continuously at most. But HID Xenon lamp provides 5000 hours service life which is the same with the Automobile life (the European standard)

3.Excellent saved power; Halogen lamp usually consumes about 55-65W electric power averagely . But HID Xenon lamp only consumes 35W , which can draw less power from your vehicles electrical system and dramatically improve the performance of the vehicles.

4.Brilliant colour temperature ; The colour temperature is approximately 5000K-8000K campared to 3000K-4200k for halogen lamp , which is comfortable to our eyes , also benefit for the safe driving indirectly.

5.Reliable security ; Sealed by advanced irrigative technology , HID Xenon lamp is with high intensity , waterproof , dustproof , shockproof properties.

6.Convenient installation ; Only insert HID Xenon lamp into the original lamp hole , fix ballast and connect power supply . No need to alter any part of original vehicle.

Most Advanced Production Line:

Full set of production line for producing vehicle metal halide lamp . All the major process ,such as mercury and pellet injection , electrode location ,gas pumping , xenon filling , gas pumping, xenon fillinf, plasma sealing etc, are carried out at special working station within glove box which is filled with pure argon , the components of water and oxygen in glove bos is less than 0.1 ppm . All producing process is completely isolated with the air environment. In 2007, our company are going to import total 8 manufacture lines.

Use condition :

1 , Input voltage DC 13.5V ignition point range DC 9~18V

2 , Output wattage 35±2W

3 , Temp. Range; -40°C~+105°C

Color Temp. 4200K 6000K 8000K

Brief use ; can be matched with various motor vehicles , also can be use in search , projection and other special place.

We provide all kinds of HID lamp with high quality and competitive price.Welcome to your order or trial order  

HID Common Issues & FAQ

Both HID bulbs keep flickering and making clicking noise.

1. Make sure the HID bulbs have been connected to the ballasts correctly and are secure.

2. Check for proper voltage output from your car battery.

3. If your car’s low beam has daytime running lights, make sure to disable that before installing the HID kit.

HID bulb modules do not fit.

1. Inspect if you bought the appropriate bulb type for your vehicle. Select your vehicle make on the top left corner to display the bulb type for your vehicle.

2. Some vehicles require adaptor that can be custom ordered from us (ex. BMW E46). Please contact us for information.

HID Lights turn on, but shortly after both sides turn off.

Fuse(s) may be blown. Please check your fuses box according to your vehicle’s user manual and upgrade the stock 10mA or 15mA headlight fuse to 30mA. 30mA fuses are included in the package.

NOTE: The 30mA fuses are 100% safe for your vehicle, they won’t cause problems such as damage your other electrical circuits.

GENERAL TIPS and GUIDELINES:

»» Always start your engine before you activate your HIDs.

»» Do not turn the HIDs on and off frequently or rapidly.

»» Do not install the HID ballasts and igniters near the engine or any place where water can reach the HID components.

»» Make sure the HID connectors are tight and secured to the stock harness.

PLEASE NOTE:

»» You MUST DISABLE Daytime Running Light or “Auto Switch-On” functions before the HID installation.

»» HID systems require a minimum and continuous 12 Volt power source, which could be effected by ‘automatic lighting’ that comes on various vehicles.

HID randomly shut off on their own.

Inside of the HID ballast, there is a micro chip which is used to detect whether there is any potential problem. Any potential problems such as surges, voltage spikes, power shortage and even extremely high heat will trigger the self protect and shut the ballast off temporarily. It takes approx. 3 minutes for the micro chip to reset. After a minimum of 3 minutes, please turn off the HIDs and wait approx. 3 to 5 minutes before use.

Inspection Procedure: Please check the car battery. Check all connections between the bulb, ballast, & igniter. Check the vehicle battery terminal.

Only one light works, although both lights are installed exactly the same.

1. The polarity of one side might not match with the stock harness.

2. Fuse might be blown on this side.

3. Malfunctioned parts.

Inspection Procedure: Check all connections between the bulb, ballast, & igniter. Check the bulb that does not work. Check the fuses. Use at least 30mA fuse if the stock 15mA fuse blows. Switch the failing bulb module to the working one to see if the problem remains. If the failing light now works, the bulb could be faulty. If the problem still persists, the Ballast and/or Igniter may be at fault. Check the Ballast and Igniter; switch it to the working side of the vehicle. If the problem still persists, the Ballast and/or Igniter are bad. If HID system works properly; your vehicle electrical connections, car battery, alternator, and other devices may have issues.

 

The ballasts make electric noise when first turn on.

This is normal. HID ballasts receive charge from the car battery in order to activate HIDs.

HID series with good quality and competitive price



Copyright Notice @ 2008-2012 ECVERY Limited and/or its subsidiaries and licensors. All rights reserved.